Universality of Hair as a Nucleant: Exploring the Effects of Surface Chemistry and Topography.

The ability to control crystal nucleation through the simple addition of a nucleating agent (nucleant) is desirable for a huge range of applications. However, effective nucleating agents are known for only a small number of systems, and many questions remain about the mechanisms by which they operate. Here, we explore the features that make an effective nucleant and demonstrate that the biological material hair-which naturally possesses a chemically and topographically complex surface structure-has excellent potential as an effective nucleating agent. Crystallization of poorly soluble compounds in the presence of hairs from a range of mammals shows that nucleation preferentially occurs at the cuticle step edges, while a novel microdroplet-based methodology was used to quantify the nucleating activities of different hairs. This showed that the activities of the hairs can be tuned over a wide range using chemical treatments. Analysis of the hair structure and composition using atomic force microscopy, scanning ion conductance microscopy, and X-ray photoelectron spectroscopy demonstrates that surface chemistry, surface topography, and surface charge all act in combination to create effective nucleation sites. This work therefore contributes to our understanding of heterogeneous nucleating agents and shows that surface topography as well as surface chemistry can be used in the design or selection of universal nucleating agents.

Strong absorption and ultrafast localisation in NaBiS2 nanocrystals with slow charge-carrier recombination.

I-V-VI2 ternary chalcogenides are gaining attention as earth-abundant, nontoxic, and air-stable absorbers for photovoltaic applications. However, the semiconductors explored thus far have slowly-rising absorption onsets, and their charge-carrier transport is not well understood yet. Herein, we investigate cation-disordered NaBiS2 nanocrystals, which have a steep absorption onset, with absorption coefficients reaching >105 cm-1 just above its pseudo-direct bandgap of 1.4 eV. Surprisingly, we also observe an ultrafast (picosecond-time scale) photoconductivity decay and long-lived charge-carrier population persisting for over one microsecond in NaBiS2 nanocrystals. These unusual features arise because of the localised, non-bonding S p character of the upper valence band, which leads to a high density of electronic states at the band edges, ultrafast localisation of spatially-separated electrons and holes, as well as the slow decay of trapped holes. This work reveals the critical role of cation disorder in these systems on both absorption characteristics and charge-carrier kinetics.

Versailles Project on Advanced Materials and Standards interlaboratory study on intensity calibration for x-ray photoelectron spectroscopy instruments using low-density polyethylene.

We report the results of a Versailles Project on Advanced Materials and Standards interlaboratory study on the intensity scale calibration of x-ray photoelectron spectrometers using low-density polyethylene (LDPE) as an alternative material to gold, silver, and copper. An improved set of LDPE reference spectra, corrected for different instrument geometries using a quartz-monochromated Al Kα x-ray source, was developed using data provided by participants in this study. Using these new reference spectra, a transmission function was calculated for each dataset that participants provided. When compared to a similar calibration procedure using the NPL reference spectra for gold, the LDPE intensity calibration method achieves an absolute offset of ∼3.0% and a systematic deviation of ±6.5% on average across all participants. For spectra recorded at high pass energies (≥90 eV), values of absolute offset and systematic deviation are ∼5.8% and ±5.7%, respectively, whereas for spectra collected at lower pass energies (<90 eV), values of absolute offset and systematic deviation are ∼4.9% and ±8.8%, respectively; low pass energy spectra perform worse than the global average, in terms of systematic deviations, due to diminished count rates and signal-to-noise ratio. Differences in absolute offset are attributed to the surface roughness of the LDPE induced by sample preparation. We further assess the usability of LDPE as a secondary reference material and comment on its performance in the presence of issues such as variable dark noise, x-ray warm up times, inaccuracy at low count rates, and underlying spectrometer problems. In response to participant feedback and the results of the study, we provide an updated LDPE intensity calibration protocol to address the issues highlighted in the interlaboratory study. We also comment on the lack of implementation of a consistent and traceable intensity calibration method across the community of x-ray photoelectron spectroscopy (XPS) users and, therefore, propose a route to achieving this with the assistance of instrument manufacturers, metrology laboratories, and experts leading to an international standard for XPS intensity scale calibration.

Triple negative lobular breast carcinoma metastatic to an ovarian fibrothecoma.

A postmenopausal woman with lobular breast carcinoma metastatic to a large ovarian fibrothecoma is presented. The two metastatic tumor nodules were grossly subtle and could have been overlooked in the background of the large ovarian stromal tumor. Thorough sampling of the tumor for histologic examination and supporting immunohistochemical stains were important in establishing the diagnosis. Differential diagnostic considerations are discussed.

Effect of ligand methylation on the spin-switching properties of surface-supported spin-crossover molecules.

X-ray absorption spectroscopy investigations of the spin-state switching of spin-crossover (SCO) complexes adsorbed on a highly-oriented pyrolytic graphite (HOPG) surface have shown so far that HOPG is a promising candidate to realize applications such as spintronic devices because of the stability of SCO complexes on HOPG and the possibility of highly efficient thermal and light-induced spin-state switching. Herein, we present the spin switching of several Fe(II) SCO complexes adsorbed on an HOPG surface with particular emphasis on the thermally induced spin transition behaviour with respect to different structural modifications. The complexes of the type [Fe(bpz)2(L)] (bpz = dihydrobis(pyrazolyl)borate, L = 1,10-phenanthroline, 2,2'-bipyridine) and their methylated derivatives exhibit SCO in the solid state with some differences regarding cooperative effects. However, in the vacuum-deposited thick films on quartz, complete and more gradual spin transition behavior is observable via UV/vis spectroscopy. In contrast to that, all complexes show large differences upon direct contact with HOPG. Whereas the unmodified complexes show thermal and light-induced SCO, the addition of e.g. two or four methyl groups leads to a partial or a complete loss of the SCO on the surface. The angle-dependent measurement of the N K-edge compared to calculations indicates that the complete SCO and HS-locked molecules on the surface exhibit a similar preferential orientation, whereas complexes undergoing an incomplete SCO exhibit a random orientation on the surface. These results are discussed in the light of molecule-substrate interactions.

Evolution of cooperativity in the spin transition of an iron(II) complex on a graphite surface.

Cooperative effects determine the spin-state bistability of spin-crossover molecules (SCMs). Herein, the ultimate scale limit at which cooperative spin switching becomes effective is investigated in a complex [Fe(H2B(pz)2)2(bipy)] deposited on a highly oriented pyrolytic graphite surface, using x-ray absorption spectroscopy. This system exhibits a complete thermal- and light-induced spin transition at thicknesses ranging from submonolayers to multilayers. On increasing the coverage from 0.35(4) to 10(1) monolayers, the width of the temperature-induced spin transition curve narrows significantly, evidencing the buildup of cooperative effects. While the molecules at the submonolayers exhibit an apparent anticooperative behavior, the multilayers starting from a double-layer exhibit a distinctly cooperative spin switching, with a free-molecule-like behavior indicated at around a monolayer. These observations will serve as useful guidelines in designing SCM-based devices.

Soft-x-ray-induced spin-state switching of an adsorbed Fe(II) spin-crossover complex.

For probing the nature of spin-state switching in spin-crossover molecules adsorbed on surfaces, x-ray absorption spectroscopy has emerged as a powerful tool due to its high sensitivity and element selectivity in tracing even subtle electronic, magnetic, or chemical changes. However, the x-rays itself can induce a spin transition and might have unwanted influence while investigating the effect of other stimuli such as temperature or light, or of the surface, on the spin switching behaviour. Herein, we present the spin switching of an Fe(II) complex adsorbed on a highly oriented pyrolytic graphite surface with particular emphasis on the x-ray-induced switching. For a submonolayer coverage, the complex undergoes a complete and reversible temperature- and light-induced spin transition. The spin states are switched both ways by x-rays at 5 K, i.e. from the high-spin state to the low-spin state or vice versa, depending on the relative amount of each species. Furthermore, we quantify the fraction of molecules undergoing soft x-ray-induced photochemistry, a process which results in an irreversible low-spin state component, for a particular exposure time. This can be greatly suppressed by reducing the beam intensity.

Charge transfer from an aromatic adsorbate to a semiconductor TiO(2) surface probed on the femtosecond time scale with resonant inelastic x-ray scattering.

The excited state charge transfer dynamics of an aromatic adsorbate to a rutile TiO(2) surface is studied using a core-hole clock (CHC) implementation of resonant inelastic x-ray scattering (RIXS) on the low femtosecond time scale. Comparing the abundance of the elastic and inelastic radiative N 1s core-hole decay channels provides a method for probing ultrafast injection of electrons resonantly excited to unoccupied molecular orbitals that lie above the conduction band of the substrate on the time scale of the core-hole lifetime. The method is analogous to the CHC implementation of resonant photoemission, but in the case of RIXS it is the emitted soft x-ray photons that are measured rather than photoelectrons, leaving the probed molecules in a neutral rather than ionized final state. The results reveal a charge transfer time of 2.8±1.5 fs from the lowest unoccupied molecular orbital +1 state of adsorbed bi-isonicotinic acid to the conduction band of the TiO(2) substrate.

Gastroblastoma in a 28-year-old man with nodal metastasis: proof of the malignant potential.

Gastroblastoma is a newly defined neoplasm of children and young adults with only 4 reported cases to date. Morphologically, the tumor is a mixture of epithelial structures and stromal elements with minimal cytologic atypia. In these 4 reported cases, there were no metastases or postresection recurrences. We report a case of gastroblastoma in a 28-year-old man with a histologic nodal metastasis and clinical distant metastases.

Charge transfer interactions of a Ru(II) dye complex and related ligand molecules adsorbed on Au(111).

The interaction of the dye molecule, N3 (cis-bis(isothiocyanato)bis(2,2(')-bipyridyl-4,4(')-dicarboxylato)-ruthenium(II)), and related ligand molecules with a Au(111) surface has been studied using synchrotron radiation-based electron spectroscopy. Resonant photoemission spectroscopy (RPES) and autoionization of the adsorbed molecules have been used to probe the coupling between the molecules and the substrate. Evidence of charge transfer from the states near the Fermi level of the gold substrate into the lowest unoccupied molecular orbital (LUMO) of the molecules is found in the monolayer RPES spectra of both isonicotinic acid and bi-isonicotinic acid (a ligand of N3), but not for the N3 molecule itself. Calibrated x-ray absorption spectroscopy and valence band spectra of the monolayers reveals that the LUMO crosses the Fermi level of the surface in all cases, showing that charge transfer is energetically possible both from and to the molecule. A core-hole clock analysis of the resonant photoemission reveals a charge transfer time of around 4 fs from the LUMO of the N3 dye molecule to the surface. The lack of charge transfer in the opposite direction is understood in terms of the lack of spatial overlap between the π∗-orbitals in the aromatic rings of the bi-isonicotinic acid ligands of N3 and the gold surface.

A single centre water splitting dye complex adsorbed on rutile TiO2(110): photoemission, x-ray absorption, and optical spectroscopy.

A single centre water splitting dye complex (aqua(2,2'-bipyridyl-4,4'-dicarboxylic acid)-(2,2':6',6''-terpyridine)Ruthenium(II)), along with a related complex ((2,2'-bipyridyl-4,4'-dicarboxylic acid)-(2,2':6',6''-terpyridine)chloride Ruthenium(II)), has been investigated using photoemission and compared to molecules with similar structures. Dye molecules were deposited in situ using ultra-high vacuum electrospray deposition, which allows for the deposition of thermally labile molecules, such as these dye molecules. Adsorption of the dye molecules on the rutile TiO(2)(110) surface has been studied using core-level and valence photoemission. Core-level photoemission spectra reveal that each complex bonds to the surface via deprotonation of its carboxylic acid groups. A consideration of the energy level alignments reveals that both complexes are capable of charge transfer from the adsorbed molecules to the conduction band of the rutile TiO(2) substrate.

Charge transfer dynamics of model charge transfer centers of a multicenter water splitting dye complex on rutile TiO2(110).

Charge transfer dynamics between an adsorbed molecule and a rutile TiO(2)(110) surface have been investigated in three organometallic dyes related to multicenter water splitting dye complexes: Ru 535 (cis-bis(isothiocyanato)bis(2,2'-bipyridyl-4,4'-dicarboxylato)-ruthenium(II)), Ru 455 (cis-bis(2,2'-bipyridyl)-(2,2'-bipyridyl-4,4'-dicarboxylic acid)-ruthenium(II)), and Ru 470 (tris(2,2'-bipyridyl-4,4'-dicarboxylic acid)-ruthenium(II)). The adsorption of the dye molecules on the rutile TiO(2)(110) surface has been studied using core-level and valence photoemission. Dye molecules were deposited in situ using ultrahigh vacuum electrospray deposition. Core-level photoemission spectra reveal that each complex bonds to the surface via deprotonation of two carboxylic groups. All three dye complexes show evidence of ultrafast charge transfer to the TiO(2) substrate using the core-hole clock implementation of resonant photoemission spectroscopy.

Single molecule magnets on a gold surface: in situ electrospray deposition, x-ray absorption and photoemission.

Single molecule magnets based on the dodecamanganese (III, IV) cluster with two different types of ligand (acetate and benzoate) have been studied on the Au(111) surface. Due to the non-volatile and fragile nature of the molecules, we have used ultra-high vacuum electrospray deposition to produce a series of surface coverages from a fraction of a monolayer to multilayer films in both cases. Synchrotron radiation based electron spectroscopy has been used to study the adsorption of the molecules on the Au(111) surface and the effect that this has on the oxidation states of the manganese atoms in the core. In both cases, reduction of the core is observed due to the interaction with the surface, to essentially the same extent despite substantial differences in the size and nature of the ligand shell.

Self-assembled aggregates formed by single-molecule magnets on a gold surface.

The spontaneous ordering of molecules into two-dimensional self-assembled arrays is commonly stabilized by directional intermolecular interactions that may be promoted by the addition of specific chemical side groups to a molecule. In this paper, we show that self-assembly may also be driven by anisotropic interactions that arise from the three-dimensional shape of a complex molecule. We study the molecule Mn(12)O(12)(O(2)CCH(3))(16)(H(2)O)(4) (Mn(12)(acetate)(16)), which is transferred from solution onto a Au(111) substrate held in ultrahigh vacuum using electrospray deposition (UHV-ESD). The deposited Mn(12)(acetate)(16) molecules form filamentary aggregates because of the anisotropic nature of the molecule-molecule and molecule-substrate interactions, as confirmed by molecular dynamics calculations. The fragile Mn(12)O(12) core of the Mn(12)(acetate)(16) molecule is compatible with the UHV-ESD process, which we demonstrate using near-edge X-ray adsorption fine-structure spectroscopy. UHV-ESD of Mn(12)(acetate)(16) onto a surface that has been prepatterned with a hydrogen-bonded supramolecular network provides additional control of lateral organization.

Charge transfer between the Au(111) surface and adsorbed C(60): Resonant photoemission and new core-hole decay channels.

The interaction of C(60) with the Au(111) surface has been investigated using synchrotron radiation-based electron spectroscopy. Resonant photoelectron spectroscopy and autoionization spectroscopy have been used to probe the coupling between the molecule and the substrate. Three distinct high energy spectator Auger features were observed that are only evident for a monolayer of C(60) chemisorbed to the Au(111) surface and not a multilayer or the clean surface itself. Combined with C 1s x-ray absorption and valence band spectra, the data suggest a decay process not previously reported for this system. This is a spectator decay channel involving electrons transferred from the gold substrate to the adsorbed molecule, either in the ground state or during the timescale of the core-hole lifetime. Both possibilities are considered in the interpretation of the results, which support, on balance, a ground state charge transfer.